Information
front loader with bucket
rear boxscrapper
rotary cutter
Photos
Highlights
- $40,000.00
- Temiskaming Shores
- Pre-Owned
- u00397
- 2021
- John Deere
- 2032R
- Model: 3TNV88C-NJT
- 32
- 232
- Hydrostatic transmission (HST) | Differential lock
- Diesel
- Available
Specifications
- 2021
- John Deere
- 2032R
- Base
- Compact
- Model: 3TNV88C-NJT
- Yanmar
- Gross: 23.3 kW (31.2 hp)
- 2500 rpm
- Direct Injection
- Natural
- Final Tier 4
- 3 | Cast-in-block
- 1.642 L (100.2 cu in.)
- 88 mm (3.46 in.)
- 90 mm (54 in.)
- 19.1:1
- Pressurized
- Water pump
- Dual element
- 86 Nm (63.4 lb-ft)
- 1.4 kW (1.9 hp)
- Direct Injection
- Diesel
- 18 kW (24.2 hp)
- 540 RPM | Mid: 2000 RPM
- Hydrostatic transmission (HST) | Differential lock
- Power steering
- Spur Gear | Differential lock
- Independent
- Wet disc
- R1 Ag: 7.00-12 | R3 Turf: 23x8.50-14 | R4 Industrial: 23x8.50-14 | R3 Turf Radial: 200/60 R15
- R1 Ag: 12.4-16 | R3 Turf: 14-17.5 | R4 Industrial: 14-17.5 | R3 Turf Radial: 300/70 R20
- 500 CCA
- 85 amp
- Open center | Draft control sensing: Position control
- Gear
- Steering: 15 L/min (4 gpm) | Implement: 20.2 L/min (5.3 gpm) / 35.2 L/min (9.3 gpm)
- 172.37 bar (2500 psi)
- 3-point: Category 1
- With brakes: 2.75 mm (9.02 ft.) | without brakes: 3 m (9.84 ft)
- 172.5 mm (67.9 in.)
- Front axle: 316 mm (12.5 in.)
- 32 L (8.5 gal.)
- 615 kg (1356 lb)
- Crankcase with filter: 4.5 L (4.8 qt)
- 880 kg (1940 lb)
- 1089 kg (2400 lb)
- Approximate: 1105 kg (2436 lb)
- Platform - flat/straddle: flat | Remote control valves available: Up to three | Power take-off (PTO) Control: Independent | Rollover protective structure Type: Foldable | Gear shift location - console/floor: Left Hand Side | Toolbox | Tilt steering wheel | 12-V Outlet
