MCK Temiskaming Shores Kubota

  • 883304 HWY-65
  • New-Liskeard, ON P0J 1P0
  • Call Us: (705) 647-6065
  • https://www.mcktemiskamingshores-kubota-en.ca/
Print This Page

2021 Bridgeview Manufacturing Inc. Bale King 5300

Information

2021 Bridgeview Manufacturing Inc. Bale King 5300

3 Bale Capacity – Exclusive To Bale King

We challenged our engineers to fit a third bale on our standard length processor frame and they didn’t disappoint.

Save time, save fuel, save miles, and hopefully a few climbs off the tractor to open gates!

The Bale King 5300 is unlike anything else on the market.

Proven And Flexible

If you need a little more capacity than a standard processor can offer but aren’t quite in need of a 6 bale processor, the competitive options typically involve carrying a second bale in an extra long tub. But this comes with a trade-off. The extra length costs you maneuverability, the long rotor and loading system adds complexity, and the price becomes prohibitive. Enter the Bale King 5300. It’s unique grapple arms hold a third bale in otherwise wasted space on a standard machine, maintenance is minimal, and the simplicity of the design keeps the cost in check.

The 5300 is the latest in 30 years of Bale King development. Built with flexibilty in mind, the base 2-bale configuration can be upgraded to 3-Bale capacity at any time. Adding grain to your ration" No problem. The 40 bushel rear discharge grain tank is also compatible.

Bale King processors help simplify your operation and work to get more out of your feed supply. Processed bales take less energy to digest while windrowing gives every cow equal access. Bale King processors are also the tool of choice for bedding straw. Owners report as much as 3X the coverage per bale compared to rolling straw out.

Features may include:

Overview

  • 2 Bale capacity (6ft diameter)
  • Right hand discharge puts the action on the same side as your tractor controls
  • Hydraulic bale roller design for low maintenance. Only 3 bearings in the processing mechanism
  • Windrow, bunk feed, or bed: Switch between functions with the standard hydraulic deflector

Enhancements

  • Compatible with Three-Bale Kit*
  • New, more aggressive bale rollers
  • Improved bale containment
  • Improved panel design to reduce chaff build-up
  • Simplified serviceability
  • Wider hoop grate adjustment range

Photos

Highlights

  • New-Liskeard, Ontario
  • 2021
  • Bridgeview Manufacturing Inc.
  • Bale King 5300
  • Available
  • 9'9"
  • 8'7"

Specifications

  • 2021
  • Bridgeview Manufacturing Inc.
  • Bale King
  • 5300
  • Round Baler
  • Required: 100-150 HP
  • Shaft (1000 RPM): 1000 PTO 1 3/8" 21 Spline 80 degrees Constant Velocity (1 3/4" spline available)
  • 16Lx16.1 Flotation Tires
  • Flail Tip: 7000 FPM (80 mph)
  • Flails Size: 3/4”x 1 1/2” | Bale Lift Cylinders (Nitrile Shafts): 3” x 18”
  • 8'7"
  • 19'3" | Tub: 80”
  • 9'9"
  • 6.5’
  • (flails extended): 27"
  • Controllable, up to 60 ft.
  • Bale Fork tine spacing: Adjustable | Hydraulic Remotes: 2 or 3 | Finish: Powder Coat
  • up to 3
  • 4500 lbs
  • Twine Guard Protection: Rotor/Feed rollers/Axles
  • Round up | Agitators: Dual Feed Rollers
  • Deflector: Hydraulic lift with hinged rubber flap
  • Feed Rate: Adjustable grate | Hitch: Cast with Available Clevis Insert
  • 28
  • Bale (Nitrile Shafts): Dual
  • 2 Years Parts, 1 Year Labour